When your part fails and nobody gets hurt, the bill is still real.
Coverage for the financial loss your product causes when it fails to perform
Your bracket passed inspection, shipped on time, and went into a customer's assembly line by the thousand. Six weeks later it is cracking under a load their specification called for. Nobody is hurt, but the customer stops the line, tears down finished units to swap your part, and misses its own delivery. Then the demand letter lands: lost profit, teardown labor, scrapped units. Your general liability adjuster explains that no one was injured and no property was physically damaged, so there is nothing to cover. Manufacturers errors and omissions insurance pays the defense and your customer's financial loss when your product does not do what it was supposed to do. It fills the space between product liability and product recall, a space most manufacturers assume is covered.
What Manufacturers Errors & Omissions Insurance Covers
Sometimes sold as "products E&O," "products performance," or "failure to perform" coverage, a well-built policy typically responds to:
Failure-to-Perform Claims — Pays damages when your product misses the specifications or intended use your customer relied on, even though nothing was physically injured.
Customer Lost Profits and Downtime — Covers the income your customer loses while its line is stopped or its own deliveries slip because your component failed.
Removal and Replacement Costs — Pays your customer's cost to pull your defective component and install a replacement, often called "rip and tear," which some forms include and others exclude or sublimit.
Unsellable Customer Product — Responds to the value of your customer's finished goods scrapped because your ingredient, coating, or part made them nonconforming.
Specification and Warranty Claims — Extends to breach-of-warranty and contract allegations, generally to the extent you would owe those damages without a special contractual promise.
Defense Costs — Provides attorneys and failure-analysis experts, frequently inside the limit rather than in addition to it.
What It Does Not Cover
Manufacturers E&O is narrow by design. Expect exclusions for:
- Bodily injury and property damage
- The cost to repair, replace, or refund your own product
- Recall or withdrawal of your own product
- Penalties, liquidated damages, and guarantees beyond what you would owe without the contract
- Defects known before the policy began or before you shipped
- Intentional or fraudulent conduct
- Late delivery, unless the form expressly covers delay
- Software or firmware failures, in many forms, unless technology coverage is blended in
Injury and physical damage go to general liability and product liability, recall costs to recall coverage, and code failures to technology E&O.
Who Needs Manufacturers Errors & Omissions Insurance?
Manufacturers E&O belongs in the program of any business that:
- makes components that go into another company's product, including OEM tier suppliers
- contract-manufactures or private-labels goods to a customer's specification
- supplies ingredients, resins, coatings, or adhesives whose failure ruins the customer's batch
- produces packaging or labels that can make a customer's product unsellable
- sells equipment with written guarantees on output, uptime, or tolerances
- ships products that run on embedded firmware
- signs supplier agreements requiring E&O on the certificate
How Coverage Is Structured
The ISO commercial general liability form, CG 00 01, insures bodily injury and property damage. In the 04 13 edition, exclusion k removes damage to your own product, exclusion m removes "impaired property" and property not physically injured (your customer's goods that are useless only because your defective part is inside them), and exclusion n, the "sistership" exclusion, removes the cost to recall, inspect, repair, replace, or dispose of your product or impaired property.
The policy is almost always claims-made: it responds to claims first made and reported during the policy period, for products sold after the retroactive date (forms key that date differently). Also confirm:
- Per-claim and aggregate limits, the retention, and whether defense erodes the limit
- How "loss" and "damages" are defined, which decides whether rip-and-tear and lost profit are in
- Whether it is packaged with occurrence-based products liability or recall, or added as a thin endorsement
- A contractual-liability carve-back limited to liability you would have had without the contract
- Where technology E&O fits: if your product runs on firmware you wrote, tech E&O covers the code failing and manufacturers E&O covers the physical product failing, so the two must be coordinated
Regulatory & Legal Context
When you sell goods as a merchant, the Uniform Commercial Code writes promises into the sale. Section 2-314 implies a warranty of merchantability (fit for ordinary purposes), and Section 2-315 adds fitness for a particular purpose when you have reason to know the buyer's purpose and the buyer relies on your judgment. Section 2-316 allows disclaimers if they meet its wording and conspicuousness rules. Section 2-719 lets you limit remedies to repair or replacement and exclude consequential damages unless unconscionable. The catch is the buyer's paper: under Section 2-207, the "battle of the forms," conflicting terms are sorted out by rule, and large buyers usually require a signed supplier agreement that strips your consequential-damages exclusion, adds indemnity, and demands an E&O certificate. See our guide to contractual liability.
The economic loss rule decides how your customer sues. In East River Steamship Corp. v. Transamerica Delaval (1986), an admiralty case, the U.S. Supreme Court held that a manufacturer in a commercial relationship owes no tort duty to prevent a product from injuring only itself; that loss belongs to contract and warranty. Most states follow a similar rule, often citing California's Seely v. White Motor Co. (1965), which allowed a truck buyer's lost profits under express warranty but not strict liability, while Florida's Tiara Condominium Association v. Marsh & McLennan (2013) confined its rule to products cases. Either way, a money-only product claim usually arrives as a warranty or contract claim, which is where manufacturers E&O lives.
What's Commonly Overlooked
Here is where manufacturers usually find the hole:
- A supplier agreement requiring E&O when the program is only CGL and product liability
- Consequential-damages waivers in your quotes that the buyer's purchase order overrode
- Rip-and-tear costs excluded or sublimited in the form you bought
- A retroactive date reset when changing carriers
- Firmware failures falling between technology E&O and manufacturers E&O
- Line-down charges in the buyer's contract that most policies exclude as contractual penalties
The gap that hurts most is a claim where your customer's only loss is money. When your product fails to perform and nothing is injured or physically damaged, your general liability and product liability policies usually have nothing to respond to, and without manufacturers E&O you defend and pay that claim yourself.
Real-World Claim Examples
- An adhesive batch failed to bond, an appliance maker scrapped finished units, the CGL carrier denied under the impaired-property exclusion, and manufacturers E&O paid the scrapped inventory and lost margin
- A tier-two auto supplier shipped out-of-tolerance housings, and E&O paid the OEM's removal and replacement labor but excluded the contractual line-down penalty as liquidated damages
- A packaging converter misprinted lot codes, E&O paid for the customer's held product, and reprinting its own labels stayed uninsured
- A machine builder missed a guaranteed throughput, and E&O paid only what implied warranty would owe, not the extra written promise
- A resin compounder switched carriers and accepted a new retro date, so a claim on material shipped months earlier was denied
Why Proper Placement Matters
Underwriters look first at what you make and where it ends up, since automotive or medical parts carry different severity than furniture hardware. Then they study your quality system (ISO 9001 or IATF 16949, inspection, lot traceability), customer concentration, and your contracts: whether you limit consequential damages and what guarantees you sign. This coverage is written on specialty forms, not one standard policy, and a form that covers rip-and-tear versus one that excludes it can be the entire claim.
Our Approach
At Cory Washington & Co., we start with your contracts. We read your supplier agreements, flag promises no insurer will back, compare rip-and-tear and lost-profit wording across forms, keep your retro date continuous, and coordinate with product liability, recall, technology E&O, and professional liability. We place it for manufacturers in auto parts, electronics, food and beverage, plastics, and industrial automation. For the injury side, read product liability insurance explained.
You build it to spec. We make sure the day a part misses becomes a claim your policy pays, not one your company does.
All insurance descriptions on this website are provided by Cory Washington & Co. LLC strictly for general informational purposes. They are not intended to be, and should not be relied upon as, legal, financial, or insurance advice. The information presented is general in nature and does not guarantee the availability, terms, conditions, or scope of any insurance coverage. Actual coverage is determined solely by the specific policy language issued by the insurer and remains subject to underwriting approval. Nothing on this website creates or implies an agent-client relationship, binds coverage, or alters any existing policy. Cory Washington & Co. LLC expressly disclaims any liability for actions taken, or not taken, based on the content provided here. For advice regarding your particular situation, please consult directly with a licensed insurance professional at Cory Washington & Co. LLC or another qualified insurance professional, and always review your policy documents in full.
See what to confirm in a manufacturers errors & omissions policy — what's standard, what's often limited, and what to add if needed — plus the gap most often missed, in the Manufacturers Errors & Omissions Policy Feature Checklist.
Complete the Manufacturers Errors & Omissions Supplemental online in a few guided steps, download the fillable PDF, or browse all applications.
Frequently Asked Questions
What does manufacturers errors & omissions insurance cover?
Manufacturers errors & omissions insurance typically covers failure-to-perform claims, customer lost profits and downtime, removal and replacement costs, unsellable customer product, specification and warranty claims, and defense costs.
What does manufacturers errors & omissions insurance not cover?
Common exclusions include bodily injury and property damage; the cost to repair, replace, or refund your own product; recall or withdrawal of your own product; penalties, liquidated damages, and guarantees beyond what you would owe without the contract; defects known before the policy began or before you shipped; and intentional or fraudulent conduct. Injury and physical damage go to general liability and product liability, recall costs to recall coverage, and code failures to technology E&O.
Who needs manufacturers errors & omissions insurance?
Manufacturers E&O belongs in the program of any business that makes components that go into another company's product, including OEM tier suppliers; contract-manufactures or private-labels goods to a customer's specification; supplies ingredients, resins, coatings, or adhesives whose failure ruins the customer's batch; produces packaging or labels that can make a customer's product unsellable; sells equipment with written guarantees on output, uptime, or tolerances; and ships products that run on embedded firmware.
What is most often overlooked with manufacturers errors & omissions insurance?
The gaps we find most often are a supplier agreement requiring E&O when the program is only CGL and product liability; and consequential-damages waivers in your quotes that the buyer's purchase order overrode. The gap that hurts most is a claim where your customer's only loss is money. When your product fails to perform and nothing is injured or physically damaged, your general liability and product liability policies usually have nothing to respond to, and without manufacturers E&O you defend and pay that claim yourself.
What regulations affect manufacturers errors & omissions insurance?
When you sell goods as a merchant, the Uniform Commercial Code writes promises into the sale. Section 2-314 implies a warranty of merchantability (fit for ordinary purposes), and Section 2-315 adds fitness for a particular purpose when you have reason to know the buyer's purpose and the buyer relies on your judgment.
What do underwriters look at for manufacturers errors & omissions insurance?
Underwriters look first at what you make and where it ends up, since automotive or medical parts carry different severity than furniture hardware. Then they study your quality system (ISO 9001 or IATF 16949, inspection, lot traceability), customer concentration, and your contracts: whether you limit consequential damages and what guarantees you sign.
What are examples of manufacturers errors & omissions insurance claims?
Typical claims: An adhesive batch failed to bond, an appliance maker scrapped finished units, the CGL carrier denied under the impaired-property exclusion, and manufacturers E&O paid the scrapped inventory and lost margin. A tier-two auto supplier shipped out-of-tolerance housings, and E&O paid the OEM's removal and replacement labor but excluded the contractual line-down penalty as liquidated damages. A packaging converter misprinted lot codes, E&O paid for the customer's held product, and reprinting its own labels stayed uninsured.
Available in all 50 states. See how requirements differ in California, Texas, Florida, New York, or choose your state.