Your part failed. Maybe someone got hurt, maybe nobody did. Either way, a claim is coming, and you have three policies that each sound like they should handle it: product liability, product recall, and manufacturers errors and omissions. They don't overlap the way most owners assume. Each one pays a different bucket of loss, and some buckets belong to none of them.
The buckets a product failure creates
When a product you make goes wrong, the cost lands in some combination of these piles:
- Injury or damage to others. Someone is hurt, or other property is physically damaged.
- Your own product. The defective part itself.
- Impaired property and loss of use. The customer's machine or line that is fine, but useless while your bad part sits inside it.
- Recall and withdrawal. The cost to notify, retrieve, inspect, fix, or destroy product already sold.
- The customer's financial loss. Lost profit, downtime, scrapped finished goods, missed deliveries.
- Rip-and-tear. Labor to tear out your part and install a good one.
The standard ISO general liability form, CG 00 01, insures bodily injury and property damage, then carves out several of these buckets by letter. Exclusion k removes damage to your own product. Exclusion m removes impaired property and property not physically injured, with one narrow exception: loss of use of other property caused by sudden and accidental physical injury to your product after it has been put to its intended use. Exclusion n, the recall or "sistership" exclusion, removes the cost of recalling your product or impaired property, whether incurred "by you or others." Those three letters are why the other two policies exist.
Scenario 1: a defective component injures an operator
A guard bracket you made cracks and a machine operator at your customer's plant loses two fingers. The operator's employer pays workers' comp, then the operator sues you.
This is product liability's home ground. The products-completed operations coverage defends you and pays the injury damages. If the failure also physically damaged the customer's machine, that damage is generally covered too. What it won't pay is the cracked bracket itself (exclusion k). For the basics of that coverage, see product liability insurance explained.
Scenario 2: a batch fails spec and the customer's line stops
You ship 20,000 housings that are out of tolerance. Nobody is hurt and nothing is physically damaged, but your customer shuts its line for four days, sorts inventory, and sends you a demand for lost margin and overtime.
Your general liability carrier will most likely point to exclusion m: the customer's line is impaired property, useless only because your defective part is in it. No physical injury, no coverage. This money-only loss is what manufacturers errors and omissions insurance is built for. A well-written form pays the customer's downtime and lost profit and your defense, usually on a claims-made basis. It will not pay a contractual line-down penalty beyond what you would owe without the contract.
Scenario 3: a defect forces you to fix every unit sold
A latch you supply to an appliance brand can fail open. No incidents yet, but you and the brand decide every unit in the field has to be fixed.
Exclusion n shuts the general liability door on the whole exercise, both your costs and your customer's. This is product recall coverage, and the distinction that matters is first-party vs. third-party recall:
- First-party recall pays your own costs: notification, shipping, retrieval, disposal, often replacement and lost gross profit, within the policy's limits and sublimits.
- Third-party recall pays your customer's recall expenses when your component triggered its recall. Many recall policies offer it only as an optional extension or sublimit, so check whether you have it.
Forms vary on what triggers coverage. Some require a defect that could cause injury or a government-directed recall, and a recall for poor quality alone often isn't covered.
Scenario 4: your part damages the customer's larger product
Your heating element overheats and scorches the cabinet and wiring of the commercial oven it's built into. Now there is physical damage, but to what?
Exclusion k removes only your product, the element. Damage to the rest of the oven can be "other property," which puts it back in product liability's territory. Courts split on this, though. Some treat a finished product as one integrated whole, and the economic loss rule can push the dispute into warranty. Rip-and-tear, the labor to pull your element and install a new one, is contested under general liability, and manufacturers E&O forms differ: some include it, others exclude it or cap it with a sublimit. This is where reading the actual wording decides the claim.
What none of them pay
Even a well-built program leaves a residue that stays with you:
- Warranty replacement of your own defective product in the normal course of business
- Liquidated damages and line-down penalties you agreed to by contract, beyond what you'd owe without the contract
- Fines and penalties, which are generally uninsurable and excluded
- Defects you knew about before the policy began (known-loss and prior-knowledge wording), and on many E&O and recall forms, defects you knew about before you shipped
- The cost to fix your process, retool, or requalify the part
The gotcha: the money-only claim where every policy points elsewhere
Here is the trap. A component fails in the field and your customer recalls its product. Nobody is hurt. The demand is all money: the customer's recall expense, its lost sales, and the labor to swap your part.
- The general liability carrier cites exclusion m (no physical injury) and exclusion n (recall).
- The recall carrier says it covers your recall costs, not the customer's, unless you bought third-party recall, and maybe that the event doesn't meet its trigger.
- The manufacturers E&O carrier cites its own recall and your-product exclusions.
Each denial can be correct on its own wording. Together they leave you holding a claim you assumed three policies would share. The fix is to buy the three together, with matching definitions and triggers and retroactive dates that line up, ideally reviewed side by side before a loss rather than after. If your product runs on firmware you wrote, add technology E&O to that review, because a code failure can fall between the manufacturing forms.
Our approach
At Cory Washington & Co., we map your exposure bucket by bucket before we place anything. We read your supplier agreements for line-down and consequential-damages terms, confirm whether your recall coverage includes third-party recall, compare rip-and-tear wording across manufacturers E&O forms, and line up triggers and retro dates so one event doesn't fall between three policies. We build these programs for manufacturers in auto parts, electronics, and food and beverage.
Not sure which of your policies would answer a part that fails to spec? Request a policy review and we'll walk through it with you.
Frequently Asked
Does product liability insurance cover a product that fails but doesn't hurt anyone?
Usually not. Product liability, typically the products-completed operations part of a general liability policy, pays for bodily injury and physical damage to other people's property. When your product simply fails to perform and the customer's only loss is money, such as lost profit or a stopped production line, the impaired-property exclusion generally removes it. That money-only claim is what manufacturers errors and omissions insurance is built for.
What is the difference between product recall insurance and product liability insurance?
Product liability pays third parties who are injured or whose property is damaged by your product, plus your defense. Product recall insurance pays the cost of pulling the product off the market: notification, retrieval, disposal, replacement, and often lost profit. The standard general liability form excludes recall costs, so the two policies cover opposite sides of the same defect.
Does manufacturers E&O cover the cost of replacing my own defective product?
Generally no. Manufacturers E&O pays your customer's financial loss and your defense when your product fails to perform, but most forms exclude the cost to repair, replace, or refund your own product. Replacing defective units in the normal course of business is treated as a warranty cost of doing business, not an insured loss.
Who pays when my defective part forces my customer to recall its product?
That depends on whether your recall coverage includes third-party recall, which pays a customer's recall expenses caused by your component. The general liability recall exclusion applies to costs incurred "by you or others," so your liability policy usually won't pay the customer's recall. Some manufacturers E&O forms may respond to part of the customer's financial loss, but many exclude recall, so the coverage has to be built deliberately.
This article is general information for business owners, not insurance or legal advice, and does not bind or alter coverage. Policy terms, eligibility, and pricing vary by carrier and state — confirm specifics with our licensed team before making decisions.