The Cell Runs Safe. The Line Still Missed Rate.
Protecting the integrators who design, program, and commission automated systems
It is week three of commissioning at a customer's plant. The robot cell you designed is bolted down, the scanner zones are mapped, the PLC program is on its eleventh revision, and launch is ten days out. The cell is safe. It is also running several seconds slower per cycle than your quote promised, the customer is building parts by hand on overtime, and purchasing just forwarded the liquidated damages clause. Nobody is hurt and nothing is broken, so the general liability policy most integrators lean on has nothing to say. Your work sits on two fault lines: the injury that can happen inside a cell you safeguarded, and the money a customer loses when your design or code underdelivers. Coverage starts with technology errors and omissions insurance alongside general liability.
We insure the cell, the code, and the commissioning that puts them into production.
The Automation Integrator's Signature Exposures
Robotics and automation integrators face two different kinds of loss from the same project: bodily injury when someone is hurt by a system you designed or safeguarded, and pure financial loss when that system fails to perform as promised. On the injury side, a maintenance tech enters a cell to clear a jam, an interlock has been bypassed, and the robot moves; workers' compensation protects the employer, so the suit targets your guarding design, risk assessment, and safety programming. On the financial side, cycle times miss the quote, a logic error scraps a shift of product, or a launch slips. General liability needs bodily injury or property damage to respond, and its exclusions for impaired property and your own work remove most of what is left. Add uninstalled equipment nobody has accepted yet, remote network access, and subcontracted trades, and one policy cannot carry it all.
Key Risks in Automation and Robotics Integration Operations
Integrators face exposure related to:
- Crush, pinch, and impact injuries to operators and maintenance techs inside cells you safeguarded
- Safety-function errors such as muted light curtains, mis-zoned scanners, and bypassed interlocks
- Collaborative applications deployed without a documented risk assessment
- Programming errors that crash a robot into tooling, fixtures, or the customer's product
- Cycle times, uptime, or throughput that miss what your quote promised
- Missed launch dates that trigger liquidated damages or a customer's lost production
- Damage to the system you are installing before the customer signs acceptance
- Remote access into customer OT networks for support and updates
- Subcontracted electricians, riggers, and millwrights working under your contract
- Projects in Mexico or overseas, where suits filed locally fall outside a standard policy's coverage territory
Most integrator claims are not about a robot gone rogue; they come from a promise in the quote or a gap in the safeguarding.
Core Coverages for Automation and Robotics Integrators
A properly built integrator program typically includes:
Technology E&O / Professional Liability — Covers customers' financial loss from your design, programming, and commissioning errors, including downtime, scrap, and missed performance targets.
General Liability — Responds to bodily injury and property damage from your operations and completed work, including injuries inside cells you integrated.
Umbrella / Excess Liability — Sits above general liability, auto, and employers liability for the amputation or fatality claim.
Installation Floater — Protects robots, conveyors, and controls from delivery through customer acceptance.
Cyber Liability — Responds to breaches, ransomware, and network-security claims tied to your remote access into customer plants.
Riggers Liability — Covers customer machinery you lift, move, or set during a retrofit.
Workers' Compensation — Covers engineers and field technicians in customers' plants, including other-states coverage.
Commercial Property & Inland Marine — Protects your shop, build-and-test floor, laptops, and test equipment wherever they travel.
Commercial Auto — Covers field service vehicles and equipment trailers.
Foreign Package — Extends liability, auto, and employee coverage to projects outside the United States and Canada.
For how these pieces fit together, see professional liability insurance, inland marine insurance, general liability insurance, and cyber insurance.
When a product fails to perform and your customer's only loss is money, product liability usually won't respond; manufacturers errors and omissions insurance is built for that claim.
Regulatory & Contract Context
OSHA has no robot-specific standard, so it enforces robot safety through general rules: machine guarding under 29 CFR 1910.212, which requires guarding to protect operators and others in the machine area from hazards such as points of operation and nip points, and lockout/tagout under 29 CFR 1910.147. Those duties belong to your customer as the employer, but after an injury they become the yardstick for your design; lockout/tagout and machine guarding ranked third and tenth on OSHA's preliminary fiscal 2026 list of most-cited standards. The U.S. robot standard is ANSI/A3 R15.06-2025, published in September 2025 as the national adoption of ISO 10218-1:2025 (the robot) and ISO 10218-2:2025 (robot applications and cells, the integrator's territory). It folds in the collaborative-robot guidance from ISO/TS 15066 and adds cybersecurity to safety planning, and a U.S.-developed Part 3 for users of robot cells followed in January 2026.
Your contracts matter as much as the standards. Customer terms often impose liquidated damages, performance guarantees tied to cycle time or uptime, and broad indemnity. The standard ISO general liability form (CG 00 01) excludes property damage to impaired property or property not physically injured when it arises from a defect in your work or your delay or failure to perform a contract, and it excludes damages from loss of electronic data, so those promises are only as insured as your E&O wording. A mutual waiver of consequential damages is often the most valuable sentence you can negotiate. See contractual liability insurance explained and insurance requirements in a contract decoded.
What's Commonly Overlooked
When we review integrator programs, the soft spots are predictable:
- General liability alone, with no E&O for design, programming, or commissioning errors
- A professional services exclusion on the general liability policy paired with an E&O form that excludes bodily injury
- No installation floater for equipment awaiting customer acceptance
- Liquidated damages signed without checking the E&O contractual liability exclusion
- Remote access into customer control networks with no cyber coverage
- Subcontracted electricians and riggers without additional insured endorsements and certificates on file
- Foreign projects run on a domestic-only program
The gap that hurts most is the system that works safely but does not hit rate. When a cell misses its promised cycle time and the customer loses weeks of production, there is no bodily injury and no physical damage, so general liability does not respond, and the impaired-property exclusion closes the door on loss-of-use arguments. Only a technology or professional E&O policy written to include your design, programming, and commissioning services pays that claim.
Real-World Claim Examples
- A maintenance tech enters a palletizing cell through a jumpered gate interlock and is pinned, and products-completed operations coverage defends a suit attacking the integrator's safeguarding design
- A conveyor logic error jams a distribution center for two days at peak season, and only the integrator's E&O responds to the lost-shipment claim because nothing was physically damaged
- A robot with the wrong tool offset drives into a stamping die, and general liability pays for the customer's die but not the cost to correct the program
- A robot falls from a forklift before customer acceptance, and the installation floater replaces it because the customer's property policy did not cover equipment it did not yet own
- A compromised remote-support laptop carries ransomware into a customer's HMI network, and the integrator's cyber policy funds forensics and defends the customer's claim
- A missed launch triggers liquidated damages, general liability declines, and E&O pays only part because the integrator agreed to penalties beyond its legal liability
The injury claims are rare and severe, the money claims are common and quiet, and both need an answer.
Why Proper Placement Matters
Underwriters want to know what you integrate and where it goes: welding cells, collaborative applications, palletizers, mobile robots, and safety-system design all rate differently. They look for documented risk assessments, safety-function validation, acceptance sign-offs, change-order discipline, contract terms, subcontractor controls, and how revenue splits between engineering, hardware resale, and field labor. Standard markets often treat an integrator as a machinery dealer or contractor and miss the professional exposure, so the right placement pairs a products-friendly general liability market with an E&O form that names your engineering and programming services.
Our Approach
At Cory Washington & Co., we start with your contracts. We read purchase orders and master agreements for liquidated damages, performance guarantees, and indemnity before you sign, and match your E&O wording to the services you sell. We coordinate general liability and E&O so a programming error that injures someone is not excluded by both, schedule installation floaters by project, and collect certificates from your subcontractors. We also insure the businesses around you, including industrial machinery manufacturers, electronics manufacturers, electricians, crane and rigging contractors, architects and engineers, and third-party logistics providers.
You build lines that run without you. We make sure one bad launch never runs your company.
All insurance descriptions on this website are provided by Cory Washington & Co. LLC strictly for general informational purposes. They are not intended to be, and should not be relied upon as, legal, financial, or insurance advice. The information presented is general in nature and does not guarantee the availability, terms, conditions, or scope of any insurance coverage. Actual coverage is determined solely by the specific policy language issued by the insurer and remains subject to underwriting approval. Nothing on this website creates or implies an agent-client relationship, binds coverage, or alters any existing policy. Cory Washington & Co. LLC expressly disclaims any liability for actions taken, or not taken, based on the content provided here. For advice regarding your particular situation, please consult directly with a licensed insurance professional at Cory Washington & Co. LLC or another qualified insurance professional, and always review your policy documents in full.
See the coverages an industrial automation & robotics integrator business may carry — core, prevalent, and situational — plus the gap most often missed, in the Industrial Automation & Robotics Integrator Coverage Checklist.
Complete the Industrial Automation & Robotics Integrator Supplemental online in a few guided steps, download the fillable PDF, or browse all applications.
Frequently Asked Questions
What insurance does an industrial automation & robotics integrator need?
Technology E&O / Professional Liability, General Liability, and Umbrella / Excess Liability form the core of most industrial automation & robotics integrator programs. Depending on the operation, Installation Floater, Cyber Liability, and Riggers Liability round out the program. Robotics and automation integrators face two different kinds of loss from the same project: bodily injury when someone is hurt by a system you designed or safeguarded, and pure financial loss when that system fails to perform as promised.
What insurance gaps are most often overlooked for an industrial automation & robotics integrator?
Two gaps come up again and again: general liability alone, with no E&O for design, programming, or commissioning errors; and a professional services exclusion on the general liability policy paired with an E&O form that excludes bodily injury. The gap that hurts most is the system that works safely but does not hit rate.
What regulations affect insurance for an industrial automation & robotics integrator?
OSHA has no robot-specific standard, so it enforces robot safety through general rules: machine guarding under 29 CFR 1910.212, which requires guarding to protect operators and others in the machine area from hazards such as points of operation and nip points, and lockout/tagout under 29 CFR 1910.147.
What do underwriters look at when insuring an industrial automation & robotics integrator?
Underwriters want to know what you integrate and where it goes: welding cells, collaborative applications, palletizers, mobile robots, and safety-system design all rate differently. They look for documented risk assessments, safety-function validation, acceptance sign-offs, change-order discipline, contract terms, subcontractor controls, and how revenue splits between engineering, hardware resale, and field labor.
What are common insurance claims for an industrial automation & robotics integrator?
Typical claims: A maintenance tech enters a palletizing cell through a jumpered gate interlock and is pinned, and products-completed operations coverage defends a suit attacking the integrator's safeguarding design. A conveyor logic error jams a distribution center for two days at peak season, and only the integrator's E&O responds to the lost-shipment claim because nothing was physically damaged. A robot with the wrong tool offset drives into a stamping die, and general liability pays for the customer's die but not the cost to correct the program.
What if another agency has already declined or non-renewed my coverage?
Difficult, specialty, and previously declined placements are a core part of our work. We access excess & surplus (E&S) and specialty markets that many generalist agencies cannot, and we explain the trade-offs clearly so you can decide with confidence.
Related Industries
- HVAC, Plumbing & Electrical Supply Distributor Insurance
- Truck Body & Upfitting Insurance
- Pet Supply Distributor & Wholesaler Insurance
- Trailer Manufacturing Insurance
- Furniture Distributor & Wholesaler Insurance
- Automotive Lift & Shop Equipment Manufacturing Insurance
- Appliance Manufacturing Insurance
- Lifting & Rigging Equipment Manufacturing Insurance
Manufacturing Business Insurance · All Manufacturing & Wholesale industries →
Available in all 50 states. See how requirements differ in California, Texas, Florida, New York, or choose your state.