The Storm Knocks Out the Grid. Your Name Is on the Generator.
Protecting the makers and importers of generators, power stations, compressors and pressure washers
Two days after landfall, the power is still out. The generator a family bought last week is running in their attached garage with the door cracked open, and everyone inside is asleep. Nobody in that house will notice a defect, because there is none they could see. The case that follows will turn on your warning label, whether the unit shut itself off, and how much carbon monoxide the engine produced in the first place. Generators, power stations, compressors and pressure washers all release or store serious energy far from your plant, which is why your program starts with product liability insurance and an umbrella sized for wrongful-death claims.
We insure the equipment people reach for when the grid fails, and the claims that follow it home.
The Portable Power Equipment Manufacturer's Signature Exposures
Portable power equipment manufacturers face wrongful-death and severe-injury claims driven above all by carbon monoxide from engine-driven generators, with fire, electrocution, tank rupture and high-pressure injection close behind. CO incidents cluster after hurricanes and ice storms, and some take entire households, so one event can produce several plaintiffs. Lithium-ion power stations trade exhaust for fires that start while charging, backfed generators electrocute line workers who never touched your product, and undrained compressor tanks corrode from the inside. Nearly all of these claims are argued as failures of design, warnings or shutoff technology.
Key Risks in Portable Power Equipment Manufacturing Operations
Portable power equipment manufacturers face exposure related to:
- Carbon monoxide poisoning from generators run in garages, basements and enclosed spaces
- Multiple-fatality CO incidents during storm-related outages
- Backfeed electrocution of utility workers from generators connected without a transfer switch
- Lithium-ion fires in portable power stations during charging, storage or shipping
- Fuel leaks and fires from generator tanks, lines and carburetors
- Air receiver tank ruptures from internal corrosion, failed relief valves or overpressure
- High-pressure injection and laceration injuries from pressure washer wands and nozzles
- Electric shock from corded pressure washers and generator receptacles
- Recall campaigns covering a full storm season's production
- Retailer vendor agreements and surge shipments from overseas factories ahead of hurricane season
People buy these products in a crisis and use them tired, cold and improvising, and your warnings and engineering have to anticipate that.
Core Coverages for Portable Power Equipment Manufacturers
A properly built portable power program typically includes:
Products-Completed Operations Liability — Covers bodily injury and property damage to others caused by generators, power stations, compressors and washers you made or imported, including defense of wrongful-death suits.
Umbrella / Excess Liability — Adds limits above products and employers liability, because a multiple-fatality CO incident can exceed any primary policy.
Product Recall Expense — Pays notification, retrieval, repair and replacement costs when a fuel-leak, battery or shutoff defect forces a recall, costs product liability does not cover.
General Liability — Responds to premises claims and to injuries at trade shows and demos.
Vendors Additional Insured Endorsement — Extends your products coverage to the home centers, hardware chains and online sellers that resell your units.
Marine Cargo & Stock Throughput — Protects containers of finished units and battery packs in transit and in your warehouses during pre-season surges.
Commercial Property & Business Income — Protects inventory, tooling and test cells, and replaces income if a fire or supplier failure costs you peak season.
Workers' Compensation — Covers assembly, engine test and warehouse employees handling fuel and batteries.
For background, see how product liability insurance works, how umbrella and excess liability works, and our product recall coverage page.
Regulatory & Safety Context
Since May 14, 2007, CPSC has required portable generators to carry a DANGER label on the unit and the package warning that using a generator indoors "can kill you in minutes" and that exhaust contains carbon monoxide, a poison you cannot see or smell (16 CFR Part 1407). CPSC has tried for years to go further, proposing carbon monoxide emission limits in November 2016 and a supplemental proposal with emission and shutoff requirements in April 2023 (proposed 16 CFR Part 1281); its most recent published regulatory agenda lists the rule at the final-rule stage, with no final standard issued. Meanwhile, plaintiffs cite two voluntary standards: ANSI/PGMA G300, revised in 2023, and UL 2201 both require a generator to shut off when carbon monoxide builds up around it, and UL 2201 also requires lower emission rates; CPSC staff's 2022 modeling estimated that G300-compliant generators would avert nearly 87 percent of the deaths studied and UL 2201-compliant units nearly all of them. CPSC reports an annual average of 74 consumer CO deaths from generators from 2004 through 2021.
Power stations are certified to UL 2743 (portable power packs) and electric pressure washers to UL 1776. Workplace air receivers must be built to the ASME Boiler and Pressure Vessel Code, Section VIII, with spring-loaded safety valves, a pressure gauge and a drain at the lowest point (29 CFR 1910.169). OSHA warns that attaching a generator to a building without a properly installed transfer switch can energize lines for great distances and electrocute utility workers. And under CARB's small off-road engine rules, which EPA authorized in January 2025, emission standards for new portable generator engines sold in California drop to zero in model year 2028, though manufacturers may use emission credits to certify gas engines through 2032.
What's Commonly Overlooked
In portable power programs, the trouble usually hides in the policy wording rather than on the limits page:
- A total pollution exclusion endorsement on the general liability or umbrella policy
- A products aggregate sized for a parts supplier rather than a brand with storm-season volume
- No recall expense coverage for battery, fuel-leak or shutoff defects
- Vendor endorsements missing for online marketplaces and regional chains
- Overseas factory certificates that never name the U.S. importer
- Discontinued models without CO shutoff dropped from the description of products
The gap that hurts most is a total pollution exclusion on a generator maker's liability policy. The standard ISO general liability form leaves room for pollution claims arising from your products, but a total pollution endorsement such as CG 21 49 removes that carve-back, and courts are split on whether carbon monoxide is a "pollutant": the Illinois Supreme Court has limited the exclusion to traditional environmental pollution, while the Eighth Circuit, applying North Dakota law in April 2026, enforced a farm policy's pollution exclusion against a claim for CO injuries from a portable heater (North Star Mutual v. Rodin). For a company whose signature claim is carbon monoxide, that one endorsement can decide whether there is any coverage at all.
Real-World Claim Examples
- A family is hospitalized after running a generator in an attached garage during an ice storm, the suit argues the unit should have had automatic CO shutoff, and products coverage funds a defense built on the label and the manual
- A line worker is shocked restoring service because a homeowner backfed a generator through a dryer outlet, the worker sues the manufacturer over its warnings, and the products policy defends
- A power station overheats while charging in a bedroom, the homeowner's insurer subrogates against the importer, and the importer's products policy pays the fire damage
- A fuel-line defect forces a recall of a season's generators, the products policy answers the two fire claims, and the retrieval program comes out of pocket because recall coverage was never bought
- A CO death claim is tendered under a policy carrying a total pollution exclusion, the insurer denies the defense, and the manufacturer funds its own lawyers while coverage counsel fights the denial
The products people buy in an emergency get used in the worst conditions, and the claims reflect it.
Why Proper Placement Matters
Underwriters look hardest at carbon monoxide: which models carry shutoff technology, which voluntary standard they certify to, how many legacy units without shutoff remain in the field, and how your labels and manuals compare with 16 CFR Part 1407. They also want UL 2743 certification for power stations, relief-valve testing for compressors, supplier certificates for imports, and a recall plan that works at peak demand. Markets that will write CO-exposed products without a total pollution endorsement exist, and finding them is the job.
Our Approach
At Cory Washington & Co., we read the pollution and umbrella wording before anything else, then size the products aggregate and umbrella to a multiple-fatality event. We build recall coverage that works during storm season, issue vendor endorsements and certificates retailers accept, and collect insurance from overseas factories. We also insure the businesses around you, including electronics manufacturers, outdoor power equipment manufacturers, appliance manufacturers, importers and wholesale distributors, hardware stores, and home improvement stores, all within our manufacturing insurance practice.
You build what people trust when the lights go out. We make sure one storm season never decides the future of the company.
All insurance descriptions on this website are provided by Cory Washington & Co. LLC strictly for general informational purposes. They are not intended to be, and should not be relied upon as, legal, financial, or insurance advice. The information presented is general in nature and does not guarantee the availability, terms, conditions, or scope of any insurance coverage. Actual coverage is determined solely by the specific policy language issued by the insurer and remains subject to underwriting approval. Nothing on this website creates or implies an agent-client relationship, binds coverage, or alters any existing policy. Cory Washington & Co. LLC expressly disclaims any liability for actions taken, or not taken, based on the content provided here. For advice regarding your particular situation, please consult directly with a licensed insurance professional at Cory Washington & Co. LLC or another qualified insurance professional, and always review your policy documents in full.
See the coverages a portable power equipment manufacturer business may carry — core, prevalent, and situational — plus the gap most often missed, in the Portable Power Equipment Manufacturer Coverage Checklist.
Complete the Portable Power Equipment Manufacturer Supplemental online in a few guided steps, download the fillable PDF, or browse all applications.
Frequently Asked Questions
What insurance does a portable power equipment manufacturing need?
The foundation for a portable power equipment manufacturing is usually Products-Completed Operations Liability, Umbrella / Excess Liability, and Product Recall Expense. Many also need General Liability, Vendors Additional Insured Endorsement, and Marine Cargo & Stock Throughput. Portable power equipment manufacturers face wrongful-death and severe-injury claims driven above all by carbon monoxide from engine-driven generators, with fire, electrocution, tank rupture and high-pressure injection close behind.
What insurance gaps are most often overlooked for a portable power equipment manufacturing?
Watch for a total pollution exclusion endorsement on the general liability or umbrella policy, and for a products aggregate sized for a parts supplier rather than a brand with storm-season volume. The gap that hurts most is a total pollution exclusion on a generator maker's liability policy.
What regulations affect insurance for a portable power equipment manufacturing?
Since May 14, 2007, CPSC has required portable generators to carry a DANGER label on the unit and the package warning that using a generator indoors "can kill you in minutes" and that exhaust contains carbon monoxide, a poison you cannot see or smell (16 CFR Part 1407).
What do underwriters look at when insuring a portable power equipment manufacturing?
Underwriters look hardest at carbon monoxide: which models carry shutoff technology, which voluntary standard they certify to, how many legacy units without shutoff remain in the field, and how your labels and manuals compare with 16 CFR Part 1407. They also want UL 2743 certification for power stations, relief-valve testing for compressors, supplier certificates for imports, and a recall plan that works at peak demand.
What are common insurance claims for a portable power equipment manufacturing?
Typical claims: A family is hospitalized after running a generator in an attached garage during an ice storm, the suit argues the unit should have had automatic CO shutoff, and products coverage funds a defense built on the label and the manual. A line worker is shocked restoring service because a homeowner backfed a generator through a dryer outlet, the worker sues the manufacturer over its warnings, and the products policy defends. A power station overheats while charging in a bedroom, the homeowner's insurer subrogates against the importer, and the importer's products policy pays the fire damage.
What if another agency has already declined or non-renewed my coverage?
Difficult, specialty, and previously declined placements are a core part of our work. We access excess & surplus (E&S) and specialty markets that many generalist agencies cannot, and we explain the trade-offs clearly so you can decide with confidence.
Related Industries
- Power Tool & Hand Tool Manufacturing Insurance
- Outdoor Power Equipment Manufacturing Insurance
- Cutting Tools, Blades & Abrasives Manufacturing Insurance
- Agricultural & Farm Equipment Manufacturing Insurance
- Ladder, Scaffold & Aerial Lift Manufacturing Insurance
- Construction & Compact Equipment Manufacturing Insurance
- Lifting & Rigging Equipment Manufacturing Insurance
- Industrial Machinery & Equipment Manufacturing Insurance
Manufacturing Business Insurance · All Manufacturing & Wholesale industries →
Available in all 50 states. See how requirements differ in California, Texas, Florida, New York, or choose your state.