Power Tool & Hand Tool Manufacturing Insurance

Power Tool & Hand Tool Manufacturing Insurance

Insurance for power tool and hand tool makers, private-label brands, and importers: laceration and amputation suits, lithium-ion battery fires, CPSC reporting and recalls, retailer vendor demands, and the overseas factory you can't count on.

Work With Us

Discreet, white-glove placement in all 50 states.

★★★★★ 5.0 · 52 Google reviews

Get a Quote

Book a call →

Industry Coverage

Your Brand Is on the Box. That Makes You the Manufacturer.

Protecting tool makers, private-label brands, and importers from the jobsite to the garage

On a Saturday afternoon in a suburban garage, a homeowner borrows a neighbor's cordless circular saw, the lower guard sticks open, and the saw kicks back across his thigh. A week later a battery pack from the same line, left on its charger overnight, starts a fire that takes the garage with it. Both were built on a contract line overseas, but your brand is on the housing, your company imported them, and your name is the one a plaintiff's lawyer can serve. Whether you design and build in the United States, sell under your own label, or import for a retailer, your tools reach millions of untrained users, and the product liability, consumer safety, and recall rules all treat you as the maker. Your program starts with product liability insurance built for that reach.

We insure the tool, the battery, and the brand that ties them to you.

The Tool Company's Signature Exposures

Power tool and hand tool companies face product liability suits over lacerations, amputations, eye injuries, and battery fires, brought against whoever designed, branded, or imported the tool, often for tools made by an overseas factory the plaintiff cannot reach. Consumer tools fall under the Consumer Product Safety Commission, with short reporting deadlines and serious penalties, and lithium-ion packs and chargers add fire claims that can cost more than the injuries. Hand tools bring a steady flow of claims over striking tools that chip and sockets that shatter. Over all of it sit the retailers, whose vendor agreements demand endorsements, indemnity, and high limits before your tools reach the shelf.

Key Risks in Tool Manufacturing Operations

Tool makers, brands, and importers face exposure related to:

  • Saw kickback, blade-contact, and guard-failure lacerations and amputations
  • Nailer injuries from contact-trip ("bump") triggers and double-fires
  • Lithium-ion battery pack and charger fires in homes and job trailers
  • Grinder wheel and cutoff-disc bursts causing eye and face injuries
  • Hand tools that chip, shatter, or slip under load
  • Overseas contract factories with no US presence or reachable insurance
  • Late CPSC reporting and the civil penalties that follow
  • Retailer vendor agreements demanding indemnity and additional insured status
  • California Proposition 65 warning claims on cords, grips, and housings
  • Recalls of tools or battery packs sold through thousands of retail doors

Your tools go home with people who never read the manual, and every one of them carries your name.

Core Coverages for Tool Manufacturers and Brands

A well-built tool company program typically includes:

Products-Completed Operations Liability — Covers injury and property damage from tools, batteries, and chargers you make, brand, or import, with a products aggregate sized for amputation and fire losses.

Umbrella / Excess Liability — Sits over products and auto liability and meets the high limits national retailers write into vendor agreements.

Product Recall Expense — Pays for notification, retrieval, destruction, and replacement when a tool or battery pack is recalled, including voluntary CPSC recalls.

Vendors Coverage for Your Retailers — Extends your products coverage to the stores that sell your line through the ISO CG 20 15 vendors endorsement.

General Liability — Responds to premises claims at your offices, warehouse, and demo events and to advertising injury claims.

Marine Cargo & Stock Throughput — Covers inventory on ocean vessels, at ports, and in transit to distribution centers.

Commercial Property & Business Income — Protects your warehouse, battery stock, test lab, and tooling, with contingent business income when a key overseas supplier shuts down.

Foreign Liability — Extends coverage to suits filed outside the United States and Canada when you sell tools abroad.

Workers' Compensation — Covers assembly, warehouse, and test-lab employees.

Private-label sellers should read the apparent manufacturer rule; see also how product liability insurance works, types of additional insured endorsements, and product recall coverage.

Regulatory & Compliance Context

Consumer tools sit under the Consumer Product Safety Act, which defines a manufacturer as anyone who manufactures or imports a consumer product, so an importer carries the same federal duties as a factory (15 U.S.C. §2052(a)(11)). Under Section 15(b), you must report to the CPSC within 24 hours of obtaining information that reasonably supports the conclusion that a product has a defect that could create a substantial product hazard or creates an unreasonable risk of serious injury or death, and your investigation should not exceed 10 days unless a longer period is reasonable (16 CFR 1115.14). Late reporting can bring civil penalties of up to $120,000 per violation and $17,150,000 for a related series, the maximums in force since January 2022, with the next five-year inflation adjustment due to be published by December 1, 2026 and take effect January 1, 2027 (86 FR 68244). Section 37 adds a lawsuit trigger: when one model draws at least three death or grievous-injury suits that end in a settlement or plaintiff's judgment within one of the statute's fixed 24-month periods, you must report them within 30 days (15 U.S.C. §2084).

There is no federal blade-contact mandate for table saws; the CPSC withdrew that rulemaking on September 29, 2025 (90 FR 46541). Testing carries the weight instead: most power tools are evaluated to the UL 62841 series, whose Annex K covers battery-powered tools and packs, by laboratories OSHA recognizes under 29 CFR 1910.7. Lithium-ion packs you ship must be of a type tested to UN 38.3, with a test summary available downstream (49 CFR 173.185). California's Proposition 65 applies to businesses with 10 or more employees, lets a manufacturer or importer comply by labeling or by giving retailers written notice and warning materials (27 CCR 25600.2), and since January 1, 2025 requires short-form warnings to name at least one listed chemical, with a three-year transition for existing labels.

What's Commonly Overlooked

When we open up a tool company's insurance program, these are the holes we find most often:

  • Vendor endorsements issued without checking what each retailer agreement requires
  • Battery packs and chargers sourced from a different factory than the tool, with nothing behind them
  • A designated-products exclusion (ISO CG 21 33) quietly removing a new battery platform
  • Recall coverage that only triggers on a government order, when most tool recalls are announced as voluntary
  • No contingent business income for the one overseas factory behind your highest-volume tool

The gap that hurts most is counting on your overseas factory's insurance. When you import a tool or put your brand on it, US law treats you as the manufacturer, and the factory's policy, if it exists, is usually written for its home market and may never answer a US lawsuit. In practice, your own products policy is the one that pays.

Real-World Claim Examples

  • A private-label drill battery ignites in a garage, the homeowner's insurer subrogates against the brand, the overseas cell maker ignores every letter, and the brand owner's products policy pays
  • A framing nailer in contact-trip mode double-fires into a carpenter's hand, the suit alleges it should have shipped in sequential mode, and the products policy defends the design and warning claims
  • A retailer tenders a grinder-wheel eye injury suit, the manufacturer's vendors endorsement picks it up, and the retailer keeps the line on its shelves
  • A batch of chargers is found overheating, the company reports to the CPSC within days, and recall expense coverage pays for retrieval and replacement units that general liability excludes
  • A small importer settles three amputation suits on one saw model within two years without realizing Section 37 required a CPSC report, and the penalty exposure that follows is not something insurance will pay

The claims that hurt tool brands are rarely about one tool; they are about one design sold a million times.

Why Proper Placement Matters

Underwriters look first at what you sell and who uses it: saws, nailers, and battery platforms rate very differently from hand tools, and consumer sales drive frequency while professional sales drive severity. They want to see where each product is made, test reports, UN 38.3 summaries, warnings and manuals, incoming inspection, retailer agreements, CPSC reporting procedures, and your recall history. Importers and private-label brands with battery-powered lines often belong with specialty products markets that understand foreign sourcing, and the right placement includes vendor coverage your retailers will accept.

Our Approach

At Cory Washington & Co., we start with your sourcing map, not your sales total. We list every tool, battery, and charger by factory, confirm what insurance stands behind each supplier, and build your products coverage on the assumption that it will be the only policy that pays. We review retailer agreements before you sign, issue vendor endorsements and certificates quickly, and add recall expense that responds to voluntary CPSC recalls. We also insure the businesses on both ends of your supply chain, including tool and die makers, electronics manufacturers, importers and wholesale distributors, hardware stores, and home improvement stores.

You put your name on the tool. We make sure your coverage is built for everything that name carries.

All insurance descriptions on this website are provided by Cory Washington & Co. LLC strictly for general informational purposes. They are not intended to be, and should not be relied upon as, legal, financial, or insurance advice. The information presented is general in nature and does not guarantee the availability, terms, conditions, or scope of any insurance coverage. Actual coverage is determined solely by the specific policy language issued by the insurer and remains subject to underwriting approval. Nothing on this website creates or implies an agent-client relationship, binds coverage, or alters any existing policy. Cory Washington & Co. LLC expressly disclaims any liability for actions taken, or not taken, based on the content provided here. For advice regarding your particular situation, please consult directly with a licensed insurance professional at Cory Washington & Co. LLC or another qualified insurance professional, and always review your policy documents in full.

Free coverage checklist

See the coverages a power tool & hand tool manufacturer business may carry — core, prevalent, and situational — plus the gap most often missed, in the Power Tool & Hand Tool Manufacturer Coverage Checklist.

Ready to apply?

Complete the Power Tool & Hand Tool Manufacturer Supplemental online in a few guided steps, download the fillable PDF, or browse all applications.

Frequently Asked Questions

What insurance does a power tool & hand tool manufacturing need?

The foundation for a power tool & hand tool manufacturing is usually Products-Completed Operations Liability, Umbrella / Excess Liability, and Product Recall Expense. Many also need Vendors Coverage for Your Retailers, General Liability, and Marine Cargo & Stock Throughput. Power tool and hand tool companies face product liability suits over lacerations, amputations, eye injuries, and battery fires, brought against whoever designed, branded, or imported the tool, often for tools made by an overseas factory the plaintiff cannot reach.

What insurance gaps are most often overlooked for a power tool & hand tool manufacturing?

Two gaps come up again and again: vendor endorsements issued without checking what each retailer agreement requires; and battery packs and chargers sourced from a different factory than the tool, with nothing behind them. The gap that hurts most is counting on your overseas factory's insurance. When you import a tool or put your brand on it, US law treats you as the manufacturer, and the factory's policy, if it exists, is usually written for its home market and may never answer a US lawsuit.

What regulations affect insurance for a power tool & hand tool manufacturing?

Consumer tools sit under the Consumer Product Safety Act, which defines a manufacturer as anyone who manufactures or imports a consumer product, so an importer carries the same federal duties as a factory (15 U.S.C. §2052(a)(11)).

What do underwriters look at when insuring a power tool & hand tool manufacturing?

Underwriters look first at what you sell and who uses it: saws, nailers, and battery platforms rate very differently from hand tools, and consumer sales drive frequency while professional sales drive severity. They want to see where each product is made, test reports, UN 38.3 summaries, warnings and manuals, incoming inspection, retailer agreements, CPSC reporting procedures, and your recall history.

What are common insurance claims for a power tool & hand tool manufacturing?

Typical claims: A private-label drill battery ignites in a garage, the homeowner's insurer subrogates against the brand, the overseas cell maker ignores every letter, and the brand owner's products policy pays. A framing nailer in contact-trip mode double-fires into a carpenter's hand, the suit alleges it should have shipped in sequential mode, and the products policy defends the design and warning claims. A retailer tenders a grinder-wheel eye injury suit, the manufacturer's vendors endorsement picks it up, and the retailer keeps the line on its shelves.

What if another agency has already declined or non-renewed my coverage?

Difficult, specialty, and previously declined placements are a core part of our work. We access excess & surplus (E&S) and specialty markets that many generalist agencies cannot, and we explain the trade-offs clearly so you can decide with confidence.

Related Industries

Manufacturing Business Insurance · All Manufacturing & Wholesale industries →

Available in all 50 states. See how requirements differ in California, Texas, Florida, New York, or choose your state.

Protect What You’ve Built

When everything you’ve built is on the line, a quote isn’t enough. Tell us about your business and receive a considered assessment — not a form letter.