Wrap-Up Insurance (OCIP and CCIP): What Contractors Need…

Wrap-Up Insurance (OCIP and CCIP): What Contractors Need to Know

On a wrap-up project, the owner or general contractor buys one insurance program for everyone on site, and your own policy is endorsed to step aside. Here's how OCIPs and CCIPs work, what your GL excludes when you're enrolled, and where the gaps are.

November 17, 2026 · 5 min read · By Cory Washington

You've been awarded a subcontract, and the bid package says the project is insured under an OCIP or a CCIP. You're told to deduct your insurance cost from your bid, enroll in the program, and let the project's insurance cover your work on site. It sounds simple, and much of the time it works. But wrap-ups change how your own policies respond, and the gaps sit right where most contractors aren't looking.

What a wrap-up is

A wrap-up, or controlled insurance program, is a single insurance program bought by one party to cover many of the contractors working on a specific construction project.

  • OCIP (owner-controlled insurance program): the project owner or developer buys it.
  • CCIP (contractor-controlled insurance program): the general contractor or construction manager buys it.

Wrap-ups typically provide general liability, workers' compensation and employers liability, and excess liability for enrolled contractors' operations at the project site. Many also include a completed operations extension that continues after the project is done. Builders risk is sometimes part of the package, sometimes bought separately.

The sponsor's reasoning is control: one set of limits, one safety program, one claims process, and no finger-pointing among a dozen subcontractors' insurers.

Who's in and who's out

Enrollment is usually limited to contractors performing labor at the site. Commonly excluded: material suppliers, haulers and delivery services, equipment rental firms, design professionals, hazardous material abatement contractors, and sometimes small trades below a contract-value threshold. Excluded parties must carry their own insurance, and the contract will spell out what's required, as we cover in subcontractor insurance requirements.

If you're enrolled, you'll typically remove the insurance cost from your bid (the insurance credit), report on-site payroll to the wrap-up administrator, and follow the project safety program.

What your own policies do when you're enrolled

Your general liability insurer doesn't want to pay for a loss the wrap-up already covers, so it adds a wrap-up exclusion. The standard ISO form is CG 21 54, *Exclusion – Designated Operations Covered by a Controlled (Wrap-Up) Insurance Program*. It removes coverage for bodily injury and property damage arising out of your ongoing operations and your completed operations at the locations listed in its schedule.

ISO revised the form in its 12 19 edition. The older 01 96 version applied whenever a wrap-up had been provided for the project. The current version applies only if you are enrolled in the program for that injury or damage. The change mattered because some courts had applied the older wording to block coverage even for trades that were never enrolled, which undermined the additional insured protection the upstream parties were counting on.

Your workers' comp policy is handled similarly: the project's on-site payroll goes to the wrap-up, and your own policy is endorsed to exclude it. Keep that payroll separated in your records so it isn't charged twice at your premium audit.

Where the gaps are

Off-site work. Wrap-ups generally cover operations at the project site. Prefabrication in your shop, staging yards and deliveries usually aren't covered by the program and must fall under your own general liability. The ISO exclusion is tied to scheduled locations, so off-site work isn't excluded by it, but non-standard versions may not be so limited.

Auto, tools and professional work. Your commercial auto policy, your tools and equipment coverage and any design or professional exposure generally stay with you. Wrap-ups rarely include them.

Wording you didn't expect. Some carriers use manuscript wrap-up exclusions instead of the ISO form. These can apply to any project where a wrap-up "has ever existed," whether or not you were enrolled, whether or not the wrap-up actually covers the claim, and whether or not its limits are exhausted. An installer who returns years later to service equipment on a former wrap-up project can find that work excluded too.

The gotcha: the exclusion can outlast the wrap-up

Wrap-up exclusions are commonly written to apply whether or not the wrap-up provides the same coverage, has adequate limits, or remains in effect. That last condition is the trap.

The wrap-up's completed operations extension runs for whatever term the sponsor bought. Your exposure can run much longer. In Nevada, the construction statute of repose cuts off these claims 10 years after substantial completion (NRS 11.202), which means a suit can arrive years after the job. If the wrap-up's completed operations term ends sooner, or the program's limits are eroded by other contractors' claims, your own GL may still exclude that project, leaving nothing between you and a construction defect suit.

There are fixes worth asking for. ISO's CG 21 31, a limited version of the exclusion, gives coverage back if the wrap-up is cancelled, nonrenewed or otherwise no longer applies, though not when its limits are simply exhausted. Some insurers will also write your GL as excess over the wrap-up instead of excluding the project entirely. And before you enroll, read the program manual for the completed operations term and limits, and have your attorney review the subcontract's wrap-up provisions alongside the contract's insurance requirements.

Our approach

At Cory Washington & Co., we review the wrap-up manual and your subcontract before you enroll. We check which wrap-up exclusion your own GL uses and push for the narrowest available version, confirm off-site, auto, equipment and professional exposures are covered under your own program, and compare the wrap-up's completed operations term with your state's statute of repose so you know whether there's a gap. We also help you separate wrap-up payroll so it isn't double-counted at audit. It's the same contract-and-coverage alignment we bring to every contractor's insurance program.

Bidding a wrap-up project? Request a policy review and we'll walk through the program with you.

Frequently Asked

What is the difference between an OCIP and a CCIP?

Both are wrap-up insurance programs that cover multiple contractors on a construction project under one centrally purchased program. In an OCIP (owner-controlled insurance program), the project owner buys and controls it. In a CCIP (contractor-controlled insurance program), the general contractor or construction manager does. For an enrolled subcontractor, the practical effect is similar: your on-site work is insured under the sponsor's program instead of your own policies.

What does a wrap-up insurance program usually cover?

Wrap-ups typically provide general liability, workers' compensation and employers liability, and excess liability for enrolled contractors' work at the project site, and they often include a completed operations extension after the project ends. Commercial auto, your tools and equipment, off-site work and professional liability are generally left to your own policies. The program manual for the specific project controls what is included.

What is a wrap-up exclusion on a general liability policy?

It's an endorsement that removes coverage from your own general liability policy for work on a project insured under a wrap-up, so the two policies don't overlap. The ISO version, CG 21 54, applies to the locations listed in its schedule, and its current edition applies only when you are enrolled in the program. Some insurers use broader, non-standard versions that can reach unenrolled work or work after the program ends.

Work With Us

Discreet, white-glove placement in all 50 states.

★★★★★ 5.0 · 52 Google reviews

Get a Quote

Book a call →

This article is general information for business owners, not insurance or legal advice, and does not bind or alter coverage. Policy terms, eligibility, and pricing vary by carrier and state — confirm specifics with our licensed team before making decisions.

Protect What You’ve Built

When everything you’ve built is on the line, a quote isn’t enough. Tell us about your business and receive a considered assessment — not a form letter.