Builders Risk Insurance: Who Buys It, What It Covers…

Builders Risk Insurance: Who Buys It, What It Covers, When It Ends

Builders risk protects a project under construction, but the contract decides whether the owner or the contractor buys it. Here's who usually carries it, what it covers, how it differs from an installation floater, and the occupancy trap that ends it early.

November 17, 2026 · 6 min read · By Cory Washington

While a project is under construction, the building isn't finished property that anyone's ordinary property policy is built to insure. It's a pile of value growing by the week: foundations, framing, delivered materials, installed systems. A fire, a windstorm, or a theft of copper wire can wipe out months of work. Builders risk insurance is the policy written for that window, and the first question on every project is the one that causes the most confusion: who is supposed to buy it?

Who buys it: the contract decides

There's no law that says the owner or the contractor must carry builders risk. The construction contract decides, and the answer varies.

The most widely used general conditions, AIA A201-2017, address it in Section 11.2 together with the AIA Insurance and Bonds Exhibit. Unless the parties agree otherwise, the owner buys builders risk on an "all-risks" completed value or equivalent form, for the total value of the project at replacement cost, protecting the owner, the contractor, and subcontractors. That coverage stays in place until Substantial Completion, and then the owner continues it or replaces it with property insurance through the period for correcting the work. If the owner fails to buy the required insurance, the 2017 forms make the owner liable to the contractor for the reasonable costs and damages that result.

In practice, plenty of contracts shift that duty to the general contractor, and builders on spec homes usually buy their own. Lenders often have requirements too. What matters is that someone is clearly assigned the job, that every party with a financial stake is protected under the policy, and that the deductible responsibility is spelled out. If the language is unclear, talk to your attorney before you sign, not after a loss.

What builders risk covers

The standard ISO builders risk form (CP 00 20) insures:

  • The building or structure while under construction, including foundations
  • Fixtures, machinery, and equipment that will service the building
  • Your materials and supplies intended to become a permanent part of the building, while in or on it or within 100 feet of the site
  • Temporary structures built on site, like scaffolding, cribbing, and forms, if not otherwise insured

Policies are usually written on a completed value basis, meaning the limit reflects what the project will be worth when finished. Depending on the market and the project, additions can include materials in transit or stored off site, and soft costs and delay in completion: the extra interest, rents, and fees you lose when a covered loss pushes back opening day. See our builders risk insurance overview for the full breakdown.

What it commonly leaves out

  • Contractors' tools and equipment. Those need their own inland marine coverage. See tools and equipment insurance.
  • Liability. Injuries and damage to others on or near the site belong to general liability, not builders risk.
  • The existing building on a renovation, unless the policy is written to include it.
  • Faulty work itself. Many forms exclude the cost to redo defective workmanship or design while covering resulting damage. The wording varies a lot.
  • Flood and earthquake are often excluded or sublimited and need to be added deliberately.

Builders risk vs. an installation floater

An installation floater is an inland marine policy that insures a contractor's own interest in the materials and equipment it's installing, such as an HVAC contractor's rooftop units or an electrician's switchgear, while in transit, in storage, and on site until the work is installed or accepted, depending on the form. It does not insure the building.

Subcontractors carry installation floaters when there's no builders risk policy, when they aren't protected under the owner's or GC's policy, or when the builders risk deductible would land on them. It's a common fit for HVAC contractors, electricians, and other trades that bring high-value equipment to a site.

When coverage ends: the occupancy trap

Under the ISO builders risk form, coverage ends at the first of these events:

1. The policy expires or is cancelled 2. The property is accepted by the purchaser 3. Your interest in the property ends 4. You abandon the construction with no intention to complete it 5. Unless the insurer agrees otherwise in writing, 90 days after construction is complete 6. Unless the insurer agrees otherwise in writing, 60 days after the building is occupied in whole or in part, or put to its intended use

The gotcha is partial occupancy. The owner moves a tenant into the finished first floor, opens one wing early, or starts storing inventory before the punch list is done. That can start the 60-day clock while the contractor still has months of work and real risk on the rest of the building. Meanwhile, the owner's permanent commercial property policy may not have started yet. The fix is simple if you handle it before anyone moves in: get the insurer's written agreement to permit occupancy, and line up the start date of the permanent policy.

Two more timing traps: a delayed project can outlast the policy term, so request an extension before it expires; and on a large job enrolled in a wrap-up program, the builders risk may sit with the program sponsor, as we explain in wrap-up insurance (OCIP and CCIP).

Getting the handoff right

Before the first shovel goes in the ground:

  • Confirm in the contract who buys builders risk and who pays the deductible
  • Make sure the owner, GC, subcontractors, and lender are all protected as their interests require
  • Check the waivers of subrogation the contract requires, so a covered loss doesn't turn into one party's insurer suing another (see waiver of subrogation explained)
  • Set a date for the handoff to permanent property insurance, and confirm the insurer's position on any early occupancy

Our approach

At Cory Washington & Co., we start with the contract. We read who's assigned builders risk, confirm the policy matches the AIA or custom language, make sure every party with a stake is protected, and flag the occupancy and completion dates that can end coverage early. Whether you're a real estate developer, a general contractor, or a trade bringing equipment to someone else's site, we build the coverage around who carries the risk at each stage of the job.

Starting a project or reviewing a contract's insurance section? Request a quote or a contract review and we'll walk through it with you.

Frequently Asked

Does the owner or the contractor buy builders risk insurance?

Whoever the construction contract assigns. Under the widely used AIA A201-2017 general conditions and its insurance exhibit, the owner buys it unless the parties agree otherwise, but many contracts shift it to the general contractor, and builders on spec homes usually buy their own. Whoever buys it, the policy should protect every party with an insurable interest in the work.

When does builders risk insurance end?

Under the standard ISO builders risk form, coverage ends at the first of several events: the policy expires or is cancelled, the property is accepted by the purchaser, your interest ends, construction is abandoned, or, unless the insurer agrees otherwise in writing, 90 days after construction is complete or 60 days after the building is occupied in whole or in part or put to its intended use. Partial occupancy is the trigger owners most often miss.

What's the difference between builders risk and an installation floater?

Builders risk insures the structure under construction and the materials going into it, usually for the whole project. An installation floater is an inland marine policy that insures a contractor's own interest in the materials and equipment it is installing, including while in transit or storage. Subcontractors often use installation floaters when there's no builders risk policy or they aren't protected under it.

Does builders risk cover a contractor's tools and equipment?

Generally no. Builders risk covers the building and the materials and supplies intended to become a permanent part of it, plus some temporary structures like scaffolding and forms. A contractor's own tools and equipment need separate inland marine coverage, often called a contractor's equipment or tools floater.

Work With Us

Discreet, white-glove placement in all 50 states.

★★★★★ 5.0 · 52 Google reviews

Get a Quote

Book a call →

This article is general information for business owners, not insurance or legal advice, and does not bind or alter coverage. Policy terms, eligibility, and pricing vary by carrier and state — confirm specifics with our licensed team before making decisions.

Protect What You’ve Built

When everything you’ve built is on the line, a quote isn’t enough. Tell us about your business and receive a considered assessment — not a form letter.