Heavy Equipment Dealer Insurance | Cory Washington & Co.

Heavy Equipment Dealer Insurance

Heavy equipment dealer insurance protects construction and compact equipment dealers from lot theft, demo and test-operation losses, customer machines in the shop, lowboy hauling, and product liability on new and used machines.

Work With Us

Discreet, white-glove placement in all 50 states.

★★★★★ 5.0 · 52 Google reviews

Get a Quote

Book a call →

Industry Coverage

Your inventory has tracks, keys, and buyers who are not always customers.

Protecting construction and compact equipment dealers, their lots, and every machine that rolls off them

Walk your lot on a Monday morning. Rows of compact track loaders and mini excavators sit under the lights, a used dozer that came in on trade last week is waiting for reconditioning, a demo telehandler is out on a contractor's site across town, and two customer machines are parked in the service yard because the shop is backed up. Almost all of them can be driven onto a trailer in minutes, and each carries a different risk depending on who owns it and where it sits. The foundation is a dealers open lot or equipment dealer inventory form, but that form only answers for part of what is on your property.

The right program covers what you own, what you are holding for others, and what you sold.

The Heavy Equipment Dealer's Signature Exposures

A heavy equipment dealer carries the property risk of a lot full of high-value, easily moved machines and the liability risk of every machine it sells, demonstrates, services, and hauls. Theft is the headline property loss, and compact machines are the easiest to take: NICB's published heavy equipment theft reports ranked skid steer and wheeled loaders among the most-stolen categories and found that fewer than a quarter of stolen machines were recovered. On the liability side, you sit in the chain of distribution for machines that can crush, roll over, and swing, and you add your own fingerprints through pre-delivery setup, reconditioning, and service work. Hauling machines on lowboys adds commercial auto, permits, and load securement.

Key Risks in Heavy Equipment Dealer Operations

Construction and compact equipment dealers face exposure related to:

  • Theft of compact track loaders, skid steers, mini excavators, and attachments after hours
  • Hail, wind, flood, and fire damage to inventory concentrated on one lot
  • Floor-plan lender requirements for inventory limits, loss payee status, and value reporting
  • Demo units damaged, stolen, or causing injury on customer job sites
  • Prospective buyers injured or causing damage during test operation on your lot
  • Customer machines damaged in your service shop, wash bay, or storage yard
  • Lowboy hauling, oversize permits, and cargo securement on public roads
  • Product liability suits as the seller of new and used machines
  • Pre-delivery errors such as missing decals, guards, or seat belts not installed
  • Manufacturer dealer agreements requiring specific insurance and indemnity

Most dealers have the inventory covered; the trouble usually starts with everything that is not inventory.

Core Coverages for Heavy Equipment Dealers

A heavy equipment dealer program is built from these pieces:

Dealers Open Lot / Equipment Dealer Inventory — Covers new, used, and demo machines against theft, hail, fire, and vandalism on your lot, in transit, and at listed demo locations.

General Liability with Products-Completed Operations — Responds to injury and property damage claims arising from machines you sell and from service work after the machine leaves your shop.

Commercial Auto — Covers service trucks, tractors, and lowboy and tilt trailers, including liability while machines are being loaded, hauled, and unloaded.

Bailee Coverage for Customers' Equipment — Pays for damage to customer-owned machines in your shop, yard, or on your trailer, which your general liability excludes and many inventory forms do not cover.

Umbrella / Excess Liability — Adds limits above general liability and auto for a rollover death, a lowboy crash, or manufacturer and contractor contract requirements.

Workers' Compensation — Pays for injuries to mechanics, yard staff, parts runners, and drivers.

Commercial Property & Business Income — Protects your building, parts inventory, special tools, and diagnostic equipment, and replaces lost income after a covered shutdown.

Crime with Social Engineering — Covers employee theft and, by endorsement, money your staff wires to a fraudster posing as a supplier, lender, or customer.

For more on structuring the inventory and transit side, see inland marine insurance and product liability insurance.

Regulatory & Contract Context

Many states regulate the dealer-manufacturer relationship directly, and the rules shape what your inventory is worth if a line ends. Texas's equipment dealer law (Business and Commerce Code Chapter 57) covers construction, industrial, mining, and agricultural equipment, bars a supplier from terminating a dealer agreement without good cause, and on termination requires the supplier to pay 100% of net cost for new, unsold, undamaged equipment and undamaged demonstrators (with a reduction for units 24 to 36 months old) and 90% of current net cost for new, unsold, undamaged parts. Note the word "undamaged": hail-pocked inventory is not what the repurchase statute protects, which is one more reason inventory coverage has to be right.

Seller liability also varies by state. Texas Civil Practice and Remedies Code § 82.003 shields a non-manufacturing seller from product liability unless, among other exceptions, it altered or modified the product, installed it, controlled an inadequate warning, made an express factual misrepresentation, knew of the defect, or the manufacturer is insolvent or beyond the court's reach. Washington's RCW 7.72.040 limits a non-manufacturer to its own negligence, express warranties, and intentional misrepresentation, but treats it as the manufacturer when no solvent manufacturer can be served. On the road, federal rules cap width at 102 inches on the national network (23 CFR 658.15) and leave oversize moves to state permits, and 49 CFR 393.130 requires at least four tiedowns on machines weighing 10,000 pounds or more, with booms and buckets lowered.

What's Commonly Overlooked

Dealer programs tend to come up short in the same places:

  • Customer machines in the shop or yard with no bailee coverage, because the inventory form covers only your own stock and garagekeepers is written for autos
  • Demo units sitting at job sites that are not listed as covered locations
  • Used and reconditioned sales left off the products liability application
  • Pre-delivery inspection checklists that never make it into the deal file
  • Monthly value reports on a reporting-form inventory policy filed late or low
  • Lowboys and tilt trailers missing from the auto schedule

The gap that hurts most is believing that "as-is" on a used machine ends your responsibility for it. Under UCC § 2-316, "as-is" excludes implied warranties to your buyer; it does not stop the buyer's operator or a bystander, who never signed your sales contract, from suing you in negligence, and seller protections like Texas's fall away when you altered or modified the machine. If your products coverage was never told about used and reconditioned sales, that claim lands on a policy that never priced it.

Real-World Claim Examples

  • A used skid steer sold as-is with a disconnected seat-bar interlock pins the buyer's employee, and products-completed operations defends the negligence suit with no fight over the application because reconditioned sales had been disclosed
  • Three compact track loaders disappear over a holiday weekend, and the open-lot form pays after the theft deductible, with GPS data recovering one machine within a week
  • A shop fire destroys a customer's excavator awaiting a final drive repair, and neither the inventory form nor general liability responds, leaving the dealer's bailee coverage to pay the customer
  • A lowboy carrying a dozer strikes an overpass, and commercial auto pays the bridge damage while the inventory form's transit coverage pays to repair the machine
  • A prospective buyer test-operating a telehandler tips it into a parked pickup, and general liability pays for the pickup while the inventory form covers the telehandler
  • A spoofed email posing as a manufacturer's finance office tricks the dealer's office into wiring payment for two excavators to a fraudster, and only the crime policy's social engineering endorsement responds

In each case the outcome turned on whose machine it was and where it was sitting.

Why Proper Placement Matters

Underwriters look at your peak inventory values by location, lot security (fencing, lighting, cameras, key control, immobilizers, and GPS), and how much equipment leaves the lot on demos or rentals. On the liability side they weigh your new-versus-used mix, reconditioning and service revenue, pre-delivery procedures, and hauling operation. Markets that specialize in equipment dealers understand reporting forms, demo coverage, and bailee exposure in a way a general property market often does not.

Our Approach

At Cory Washington & Co., we read your manufacturer dealer agreement and floor-plan agreement before we quote, so the insurance, loss payee, and indemnity terms they require are built in rather than discovered at renewal. We set inventory limits to your peak season, add bailee coverage sized to the customer machines you actually hold, list demo locations, schedule every trailer, and make sure used and reconditioned sales are disclosed to the products market. We also insure related equipment businesses, including outdoor power equipment dealers, industrial equipment and machinery distributors, equipment rental companies, heavy equipment repair shops, and the excavation contractors who buy from you.

You sell the machines that build everything else. We make sure the one that rolls off your lot does not take the dealership with it.

All insurance descriptions on this website are provided by Cory Washington & Co. LLC strictly for general informational purposes. They are not intended to be, and should not be relied upon as, legal, financial, or insurance advice. The information presented is general in nature and does not guarantee the availability, terms, conditions, or scope of any insurance coverage. Actual coverage is determined solely by the specific policy language issued by the insurer and remains subject to underwriting approval. Nothing on this website creates or implies an agent-client relationship, binds coverage, or alters any existing policy. Cory Washington & Co. LLC expressly disclaims any liability for actions taken, or not taken, based on the content provided here. For advice regarding your particular situation, please consult directly with a licensed insurance professional at Cory Washington & Co. LLC or another qualified insurance professional, and always review your policy documents in full.

Free coverage checklist

See the coverages a heavy equipment dealer business may carry — core, prevalent, and situational — plus the gap most often missed, in the Heavy Equipment Dealer Coverage Checklist.

Ready to apply?

Complete the Heavy Equipment Dealer Supplemental online in a few guided steps, download the fillable PDF, or browse all applications.

Frequently Asked Questions

What insurance does a heavy equipment dealer need?

Dealers Open Lot / Equipment Dealer Inventory, General Liability with Products-Completed Operations, and Commercial Auto form the core of most heavy equipment dealer programs. Bailee Coverage for Customers' Equipment, Umbrella / Excess Liability, and Workers' Compensation are added as the operation calls for them. A heavy equipment dealer carries the property risk of a lot full of high-value, easily moved machines and the liability risk of every machine it sells, demonstrates, services, and hauls.

What insurance gaps are most often overlooked for a heavy equipment dealer?

Watch for customer machines in the shop or yard with no bailee coverage, because the inventory form covers only your own stock and garagekeepers is written for autos, and for demo units sitting at job sites that are not listed as covered locations. The gap that hurts most is believing that "as-is" on a used machine ends your responsibility for it.

What regulations affect insurance for a heavy equipment dealer?

Many states regulate the dealer-manufacturer relationship directly, and the rules shape what your inventory is worth if a line ends.

What do underwriters look at when insuring a heavy equipment dealer?

Underwriters look at your peak inventory values by location, lot security (fencing, lighting, cameras, key control, immobilizers, and GPS), and how much equipment leaves the lot on demos or rentals. On the liability side they weigh your new-versus-used mix, reconditioning and service revenue, pre-delivery procedures, and hauling operation.

What are common insurance claims for a heavy equipment dealer?

Common examples: A used skid steer sold as-is with a disconnected seat-bar interlock pins the buyer's employee, and products-completed operations defends the negligence suit with no fight over the application because reconditioned sales had been disclosed. Three compact track loaders disappear over a holiday weekend, and the open-lot form pays after the theft deductible, with GPS data recovering one machine within a week.

What if another agency has already declined or non-renewed my coverage?

Difficult, specialty, and previously declined placements are a core part of our work. We access excess & surplus (E&S) and specialty markets that many generalist agencies cannot, and we explain the trade-offs clearly so you can decide with confidence.

Related Industries

Retail Store Business Insurance · All Retail & Consumer industries →

Available in all 50 states. See how requirements differ in California, Texas, Florida, New York, or choose your state.

Protect What You’ve Built

When everything you’ve built is on the line, a quote isn’t enough. Tell us about your business and receive a considered assessment — not a form letter.